If you installed the powerful A2N Kernel to your Galaxy Ace 2 then this Kernel Control App is a "must-have-App" to enjoy your Phone and Kernel properly.

This App is only for the following Devices and only in combination with A2N Kernel.

### ed Devices ###

--> GT-I8160
--> GT-I8160P
--> GT-I8160L

### App Features ###

# Power
--> Allows you to adjust AC / USB 2.0 Charging Current(max) (separately) from 100 - 1000 mA in 100 mA Steps (Fail-safe)
--> Charging Current - Check if the power source can handle the selected Current, if it's unstable the Kernel will reduce the Current till it is safe.
--> 80% Charge - Stops and holds charging at 80%, useful if charging over night to reduce the battery stress.
--> BLN EOC - When Battery is full turn on the Soft-Keys LEDs.
--> USB Power - Enables output Voltage to the USB Port, useful if u need to power up some usb gadgets (no real OTG )
--> Show power Menu - using an emulated power-button press, useful if the power-button is broken (You can boot the Phone with a cheap USB-JIG Adapter)

# Audio #
--> Low Level Gain Control - Headphones, Earpiece and Microphone
--> LPA - Low-Power-Audio, reduces Audio Voltage on Suspend for Powersaving (up to -100 mV)
--> Volume Control - Emulated buttons press (useful if the hardware buttons are broken)

# Screen #
--> Sweep2Wake - Wake up the phone with a Swipe
--> Suspend - Emulated (useful if the Power button is broken)

# U #
--> Adjust U Max Frequency - Overclock Control (400 - 1300 MHz)**1
--> Undervolting (up to -200 mV)

# GPU #
--> Adjust GPU Max Frequency - Overclock Control (450 - 800 MHz)**2
--> Undervolting (up to -200 mV)

# Performance Profile #
--> Powersave
--> Balanced
--> Performance

# Misc #
--> KSM - Kernel same page merging, to use RAM more efficient (only 1% U load on Idle)
--> Check shared RAM - Shows the amount of saved RAM in MB
--> FSB/DDR Overclock (overclocks FSB/DDR Frequency from 200/800 MHz to 250/1000 MHz, improves overall performance)
--> Torch Brightness - allows you to adjust the Brightness of the rear LED (Camera Flash for Torch)
--> Use as Notifications LED - uses the Soft-Key LEDs
--> ON/OFF Delay - Ability to adjust how the LEDs should blink
--> Network File Systems - Enables for CIFS and NFS
--> Use calibration data - Accelerometer calibration
--> Disable Logger - Disables Android Logger, for powersaving

# Debug-Menu #
--> Disable Restore on Reboot - Disable restoring of settings on reboot, useful if you are not sure whether the settings are stable.
Otherwise all settings will survive a reboot.

**1 = Stock U max Freq is 800 MHz and the maximum adjustable Freq of 1300 MHz is very rare to work stable, since it depends on the quality of the U.
However the minimum stable overclocking Freq should be 1150 MHz, but if your Phone has good Quality chips then it will work stable at 1200 MHz or even 1250 MHz.
So the very high Frequencies are not meant to work 100% stable, but they are there so that you can see what is the maximum stable Freq possible for your Phone.

**2 = Same like U, the Stock GPU max Freq is 400 MHz. The max adjustable Freq of 800 MHz is unlikely to work stable, but 650 - 700 MHz should work stable for every Phone.

### END OF App Features ###

For more details, please check the Screenshots.

### DISCLAIMER ###
--> I am not responsible for any pain you may feel as result of using my App. You do it all at your own Risk!

World-gear-symbol designed by Freepik from www.flaticon.com - edited by ace2nutzer

// Option A // 3ze5y

To A2N Kernel Control Ace 2 mod from happymod.sitekeys.net.
You need enable the option "Unknown Sources".
1. Click on the above link to A2N Kernel Control Ace 2 mod APK.
2. Save the file in your device s folder.
3. Now tap on Install and wait for the installation to finish.
4. Once it is done, open the game and start playing it right away.

// Option B // k5a1m

To A2N Kernel Control Ace 2 from HappyMod APP, you can follow this:
1. Open your browser and the HappyMod APK file from happymod.sitekeys.net - the only official website of HappyMod.
2. Open Android Settings and go into Privacy or Security.
3. Tap the option to Allow Unknown Sources and enable it.
4. Go to your Android s and tap the APK file.
5. Follow the directions on the screen to install it.
6. Search A2N Kernel Control Ace 2 in HappyMod App.

Why does the app say I have no internet connection? 6s143h

This issue may occur due to temporary server problems or app glitches. Ensure your device is connected to a stable internet connection.

What should I do if the app is lagging? 28y6e

Lagging can be caused by insufficient device resources. Try closing other apps or restarting your device to improve performance.

Why can't I effects? 2n3f5f

ing effects may fail due to network issues or server problems. Check your internet connection and try again later.

How can I fix the network issue while using a VPN? 20461k

Sometimes, VPNs can interfere with app connectivity. Try disconnecting the VPN and see if the app works without it.

What can I do if the app keeps crashing? 603w1y

If the app crashes frequently, consider clearing the app cache or reinstalling it to resolve potential bugs.

Why can't I access AI modes in the app? 2k635j

AI modes may require a stable internet connection. Ensure your connection is strong and try again.

If AI modes are not accessible, it could be due to server issues or your internet connection. Check if other apps are working properly. If they are, the issue might be with the app itself.

Steps to resolve:
1. Check your internet connection by opening a web browser.
2. Restart your device to refresh the network settings.
3. Open the app again and try accessing the AI modes.

What should I do if the app is not ing templates? 12r6y

If templates are not ing, it may be due to a poor internet connection or server issues. Check your connection and try again later.

Why does the app keep saying 'no internet' even with a connection? 625m3z

This could be a bug in the app or a temporary server issue. Restarting the app or your device may help resolve this.

Persistent 'no internet' messages can indicate a problem with the app's ability to connect to its servers. Restarting can refresh the app's connection attempt.

Steps to resolve:
1. Close the app completely.
2. Restart your device.
3. Reopen the app and check the connection.

Why does the app crash when importing 4K videos? xv4q

The app may crash due to high resource demands when handling 4K videos. Try using lower resolution files for smoother editing.

4K videos require more processing power and memory. If your device is not equipped to handle such high-resolution files, it may lead to crashes.

What should I do if I keep getting network errors? 4d3w1j

Network errors can occur due to unstable internet connections. Try switching to a different network or resetting your router.

Network issues can disrupt the app's functionality. A stable connection is essential for smooth operation, especially when using online features.